All Collections
Tru-Test devices
XRS2i/XRS2 and SRS2i/SRS2 EID stick readers
Updating the XRS2i/XRS2 or SRS2i/SRS2's software using Data Link PC software
Updating the XRS2i/XRS2 or SRS2i/SRS2's software using Data Link PC software

Before you use your XRS2i/XRS2 or SRS2i/SRS2 EID stick reader, check that it is on the latest software version and update it if necessary

Brad Nieper avatar
Written by Brad Nieper
Updated over a week ago

Check the software version on your XRS2i/XRS2 or SRS2i/SRS2 EID stick reader to ensure you benefit from any new features.

To do this, power on the stick reader and:

  1. Select Settings and General.

  2. Check that the firmware version reads 1.4.7.0 or above. If it doesn't you will need to update the software using Data Link PC software for Windows computers.


Watch the video to learn how to:

  • Connect your XRS2i/XRS2 to Data Link PC software

  • Automatically check for updates

  • Update the XRS2i/XRS2

  • Manually check for updates

Note: In the video, the XRS2 is used as the example. The process is the same for the XRS2i and SRS2i/SRS2.


You might also be interested in:

Did this answer your question?