Setting up a Wi-Fi internet connection for your WOW system

Set up a Wi-Fi internet connection to send data from your WOW system to Datamars Livestock.

Brad Nieper avatar
Written by Brad Nieper
Updated over a week ago

You can set up a Wi-Fi connection for your Walk Over Weighing (WOW) system using the Datamars WOW Configuration app.


  • These instructions only apply to Wi-Fi enabled WOW systems.

  • Before you start, make sure that the Wi-Fi antenna is connected to the control box:

Plugging in the Wi-Fi antenna
The Wi-Fi antenna on top of the control box

To set up the Wi-Fi internet connection:

  1. Position yourself next to the WOW system.

  2. Go into your mobile phone settings and check that Wi-Fi is set to On.

  3. From the list of available networks, select RemoteWOW and enter the password trutestRemoteWOW.

  4. Open a browser (e.g. Google or Safari) and type into the address bar.

    This will launch the Datamars WOW Configuration app:

5. Go to the Settings screen.

6. Scroll down to Wi-Fi configuration.

7. Tap refresh to display the available internet connections.

8. Select the preferred network and enter the password.

9. Tap Update Wi-Fi configuration.

Having trouble?

  • Phone the Datamars Smart Farming support team:
    AU 1800 248 774
    NZ 0800 248 722
    US +1 (888) 431-0957 (toll free).
    UK +44 20 4571 7717
    IE and EU +353 (21) 242 8844

  • Ask us a question in the blue messaging tool on the bottom right hand side of your screen.

Did this answer your question?