Skip to main content
All CollectionsWalk Over Weighing (WOW) SystemsSetting up a WOW solution (all models except Dairy WOW)
Checking that weights are accurate (all models except Dairy WOW 4000)
Checking that weights are accurate (all models except Dairy WOW 4000)

After your WOW system has been set up, you should check that weights are accurate.

Updated over 2 months ago

📝 This topic is for all models except the Dairy WOW 4000. For the Dairy WOW 4000, click here.

When you first set up a WOW system, you should check to see that the scale is weighing accurately. This process can also be performed as part of troubleshooting if you suspect that animal weights are not correct.

To check that weights are accurate:

  1. Position yourself next to the WOW system.

  2. Go into your mobile phone settings and check that Wi-Fi is set to On.

  3. From the list of available networks, select RemoteWOW and enter the password trutestRemoteWOW.

  4. Open a browser (e.g. Google or Safari) and type 192.168.50.1 into the address bar.

    This will launch the Datamars WOW Configuration app:
    ​

  5. Scroll down to Current Weight.

  6. Physically stand on the middle of the platform and check your own weight.
    ​

    ​

  7. If you can't see your weight, check that the load bar cables are plugged in correctly.

  8. Check the rubber and poly seals on the inside and outside of the platform are intact and undamaged. Check underneath the platform to make sure that there are no rocks or debris is preventing movement.

Did this answer your question?