Skip to main content
All CollectionsWalk Over Weighing (WOW) SystemsSetting up a WOW solution (all models except Dairy WOW)
Setting up a Wi-Fi internet connection for your WOW system (all models except Dairy WOW 4000)
Setting up a Wi-Fi internet connection for your WOW system (all models except Dairy WOW 4000)

Set up a Wi-Fi internet connection to send data from your WOW system to Datamars Livestock.

Updated this week

📝 This topic is for all models except the Dairy WOW 4000.

You can set up a Wi-Fi connection for your Walk Over Weighing (WOW) system using the Datamars WOW Configuration app.

📝 These instructions only apply to Wi-Fi enabled WOW systems.

📝 Before you start, make sure that the Wi-Fi antenna is connected to the control unit:

Plugging in the Wi-Fi antenna
The Wi-Fi antenna on top of the control box

To set up the Wi-Fi internet connection:

  1. Position yourself next to the WOW system.

  2. Go into your mobile phone settings and check that Wi-Fi is set to On.

  3. From the list of available networks, select RemoteWOW and enter the password trutestRemoteWOW.

  4. Open a browser (e.g. Google or Safari) and type 192.168.50.1 into the address bar.

    This will launch the Datamars WOW Configuration app:

  5. Go to the Settings screen.

  6. Scroll down to Wi-Fi configuration.

  7. Tap refresh to display the available internet connections.

  8. Select the preferred network and enter the password.

  9. Tap Update Wi-Fi configuration.

Did this answer your question?