This article applies to:
U20000W, U15000W, U15000W-E Unigizers
31000W, 46000W, 86000W Mains Energizers*
* If you previously used the Datamars Livestock mobile app with your energizer, download the Datamars Pro mobile app for improved performance. Log in using your old credentials, no further setup is required.
📝 The connected energizer must be registered to the farm and connected via Wi-Fi before you can view its status. The status can be viewed in the Datamars Pro mobile app or the Datamars Livestock web app.
📝 It may take up to 15 minutes for the energizer status to refresh.
Energizer status key
OK (green) | Energizer is ON and functioning normally. |
Critical (red) | Energizer is ON but functioning below the critical threshold set. |
Warning (orange) | Energizer is ON but functioning below the warning threshold set. |
OFF/Standby (blue) | Energizer has been switched to OFF/Standby mode and the energizer is not electrifying the fence. If required, turn the energizer ON using the Datamars Pro mobile app or a Remote Control. |
Offline (grey) | Energizer is OFFLINE. The energizer does not have power or there is no Wi-Fi connection. Check the energizer power supply (mains or battery) and check the Wi-Fi. 🤚 The energizer may still be functioning, even if the Status is Offline. |
Viewing the energizer status using Datamars Pro
Viewing the energizer status using Datamars Pro
To view the status of energizers in the Datamars Pro mobile app:
In the Home screen, scroll down to Fence Monitoring panel.
The status of all energizers on your farm can be viewed at a glance:
Viewing the energizer status using Datamars Livestock
Viewing the energizer status using Datamars Livestock
To view the status of energizers in Datamars Livestock:
Click on Fence Monitoring.
The status of all energizers on your farm can be viewed at a glance:
See also: