You can connect an EID stick reader to a Tru-Test weigh scale indicator (or a third-party compatible weigh scale indicator) to automatically send Electronic ID (EID) numbers to the indicator.
📝 When an EID stick reader is connected to an indicator, only the EIDs will be sent to the indicator, not any other data you are recording.
💡 You can use Data Link PC software to upload VID/EID pairs to the indicator prior to weighing . This will mean that the VIDs will be displayed on the indicator as you weigh. If you want VIDs to display on the stick reader as well, you will also need to pre-upload them to the stick reader.
Watch the video to learn:
Why you would connect an XRS2i/XRS2 or SRS2i/SRS2 to a Tru-Test weigh scale indicator
How to connect an XRS2i/XRS2 or SRS2i/SRS2 to a 5000 series indicator
How to connect to an XRS2i/XRS2 or SRS2i/SRS2 to a Tru-Test indicator manually (this is the process to use to connect to a third-party weigh indicator)
📝 In the video the XRS2 is used as the example. The accessories and set up is the same for the XRS2i, SRS2i or SRS2.
You might also be interested in:
Register on the Datamars Livestock Training Academy to see courses about the XRS2i/XRS2 EID stick reader.