Connect your S3 indicator to Datamars Pro to:
configure the weighing settings for your S3 indicator (e.g. choose the load bars you are using)
prepare for recording weighing sessions.
🤚 Before you start, turn on the S3 indicator. Bluetooth™ will automatically be ON - no configuration is required. Position the S3 indicator close to your phone.
To connect to an S3 indicator in Datamars Pro:
Launch Datamars Pro.
On the Home screen, tap Connect my device.
Select the S3 indicator, then tap Connect.
When the dialogue appears, select S3 from the list.
The S3 indicator will connect to Datamars Pro:
Next steps: